Prima Klima Twin speed Extractor Hydroponic fan
The new Prima Klima Dual Speed range of grow room fans are a must for those wanting a little more control over their growroom ventilation! High quality fans with a higher than average air/volume capacity, available in two models . Specifically designed for the horticultural market.
– Significantly quieter than the equivelant SystemAir RVK fans.
– 2 speed motors.
– 4 meter power cord with UK plug fitted.
– Mounting bracket included.
– Plastic reducers available.
The Prima Klima PK125-2 Two-speed is highly efficient Two-speed inline duct fan equipped with an ebm-papst RadiCal centrifugal motor with backward curved blades which has been optimally adapted to the housing. The device is extremely silent when is switched to low speed. The entire housing is made of high impact resistant, flame proof polyamide (nylon). Maintance free long lasting ball bearings contribute to especially smooth running of the motor. The control system, the connections and the capacitor are fully integrated into the housing. With the use of the supplied mounting bracket the fan can be easily and safely attached to the wall or ceiling in any position.
Flange: 125mm
Max Airflow: 220/400m³/h
Power: 63W
Input: 230V 50/60Hz 0.29A
Tmax: 42°C
Measurements: 244mm x 220mm (w/h)
Weight: 2.28Kg (2.94Kg Gross Weight)
Prima Klima 125mm TempControl Quality Fan with Motor from – EBM – “Made in Germany” Up to 400m³/h The minimum speed controller combnined in this fan is a temperature depended. The minimum speed controller keeps the temperature constantly and impedes to run under the set minimum-speed. It can be easily controlled, adjusting the required temperature and the minimum speed on two knobs.
The fan comes as a finished part and is ready to use. This reliable fan and controller comes complete with a fitted plug and a low voltage sensor making it perfect for humid rooms.
The sensor comes with a 4meter long cable and can be extended up to 50meters.
Flange: 125mm
Max Airflow: 400m³/h
Power: 60W
Input: 230V 50/60Hz 0.26A
Tmax: 42°C
Measurements: 244mm x 220mm (w/h)
Weight: 2.42Kg (3.06Kg Gross Weight)
The Prima Klima PK150-2 Two-speed is highly efficient Two-speed inline duct fan equipped with an ebm-papst RadiCal centrifugal motor with backward curved blades which has been optimally adapted to the housing. The device is extremely silent when is switched to low speed. The entire housing is made of high impact resistant, flame proof polyamide (nylon). Maintance free long lasting ball bearings contribute to especially smooth running of the motor. The control system, the connections and the capacitor are fully integrated into the housing. With the use of the supplied mounting bracket the fan can be easily and safely attached to the wall or ceiling in any position.
Flange: 150mm
Max Airflow: 390/760m³/h
Power: 108W
Input: 230V 50/60Hz 0.47A
Tmax: 42°C
Measurements: 338mm x 233mm (w/h)
Weight: 3.26Kg (4.30Kg Gross Weight
Prima Klima 150mm TempControl Quality Fan with Motor from – EBM – “Made in Germany” Up to 800m³/h The minimum speed controller combnined in this fan is a temperature depended. The minimum speed controller keeps the temperature constantly and impedes to run under the set minimum-speed. It can be easily controlled, adjusting the required temperature and the minimum speed on two knobs.
The fan comes as a finished part and is ready to use. This reliable fan and controller comes complete with a fitted plug and a low voltage sensor making it perfect for humid rooms.
The sensor comes with a 4meter long cable and can be extended up to 50meters.
Flange: 150mm
Max Airflow: 760m³/h
Power: 110W
Input: 230V 50/60Hz 0.48A
Tmax: 42°C
Measurements: 338mm x 233mm (w/h)
Weight: 3.30Kg (4.22Kg Gross Weight)
The Prima Klima PK200-2 Two-speed is highly efficient Two-speed inline duct fan equipped with an MES AC motor with backward curved blades which has been optimally adapted to the housing. The device is extremely silent when is switched to low speed. The entire housing is made of high impact resistant, flame proof polyamide (nylon). Maintance free long lasting ball bearings contribute to especially smooth running of the motor. The control system, the connections and the capacitor are fully integrated into the housing. With the use of the supplied mounting bracket the fan can be easily and safely attached to the wall or ceiling in any position.
Flange: 200mm
Max Airflow: 450/950m³/h
Power: 170W
Input: 230V 50/60Hz 0.75A
Tmax: 42°C
Measurements: 340mm x 248mm (w/h)
Weight: 3.96Kg (4.76Kg Gross Weight)
| Prima Klima Sizes: | 125mm / Twin speed, 125mm Temp & Speed controlled, 150mm / Twin speed, 150mm Temp & Speed controlled, 200mm / twin speed fan |
|---|
Brand
Prima Klima
Be the first to review “Prima Klima Extractor Fans”
You must be logged in to post a review.
Related products
Extractor Fans
Red Scorpion Inline Duct fans are constructed from carbon steel and offer real quality and high pressure airflow.
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
The Wireless Thermostat is a plug and play unit with a portable design which allows it to be hung, placed or even wall mounted anywhere in your grow room or tent. The thermostat features an in-built temperature sensor and an automatic wireless connection between the remote thermostat and then reciever switch. It has a backlit LCD display [...]
Fans and Filters
With its unique coupling, the monkey fan is attached to the metal structure/frame in your grow tent.
Fans and Filters
Manufactured using only the finest Australian mined carbon, the Red Scorpion offers minimal pressure drop through the fan whilst maintaining high performance in air scrubbing.
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
Clamp 60mm – 325mm Ducting These quick release and easy-to-use clamps are used to attach fans and filters to ducting
Fans and Filters
Quiet and power efficient 3 speeds, controlled by either a dual dial or a pull cord switch Perfect for cooling offices, living spaces and grow rooms Easy to assemble Multi region plug Easily attaches to your wall
Fans and Filters
This SMSCOM temperature sensor is used for upgrading the SMSCOM Smart Controller, to ensure constant temperature control in your grow room.
Fans and Filters
RAM HEAVY DUTY PEDESTAL FAN The 450mm Heavy Duty Pedestal Fan (18”) is a sturdy and reliable fan perfect for a larger grow room. The fan offers great power output meaning it can cool down and grow room quickly, for when you need a fast cooling effect. Key features: Quiet operation means less noise in your [...]
Fans and Filters
Ducting Y Connector 100mm – 315mm Wentylation Ideal for diverting airflow or air cooling.
This product has multiple variants. The options may be chosen on the product page
Monitoring and PH Control
AIR-PRO II The RAM AIR-PRO II is an intelligent and silent indoor climate controller designed to control two inline/exhaust fans thermostatically, monitoring and keeping the desired room temperature and air pressure. All you have to do is plug in your fans, set the required air temperature and fan speed/balance and the AIR-PRO will do the [...]
Fans and Filters
The RAM SONODUCT Acoustic Ducting is ideal for reducing duct borne noise as well as fan muffling and heat. Constructed using micro perforated inner ducting to dampen noise and an acoustically transparent inter-liner which acts as a vapour barrier, this ducting has 25mm fibrewool insulation and is covered with an outer jacket, which is a multi-layer [...]
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
Can ISO Max 1Speed Fan is a Swiss-made fan. This fan is unique because it's an integrated fan and silencer.
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
Excludes temperature sensor. Please purchase temperature sensor separately. The SMSCOM Smart Controller MK2 is designed to maintain a constant temperature inside your grow room (If used with temp. sensor), whilst keeping your airflow under control at all times. The Smart Controller uses SMSCOM’s Motion Flow software system, therefore it reacts completely different to the usual types of [...]
Extractor Fans
Iso-Max is a totally unique diagonal tube fan, designed to be efficient, powerful and silent.
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
RAM HEAVY DUTY WALL FAN The 450mm Heavy Duty Wall Fan (18″) – 3 Speed helps increase the air flow within the grow room without taking up any space, due to its sturdy wall mountable design. The fan is equipped with an oscillating function, allowing the fan to distribute large amounts of air consistently through [...]
Fans and Filters
This RAM ECO Fan is ideal for a space-conscious grower. Its narrow design makes it ideal to fit into a grow room or grow tent providing excellent air circulation. Better than concentrating all the power into one direction. The grille will spin on this fan making the air change direction (like an oscillating movement).
Fans and Filters
Monkey Fan 30W Circulator Fan Compatible with Secret Jardin tents: Tube Ø16 to Ø21 mm Does not fall – Easy to install – Easy to adjust in height – Metal Grid Engine 100% Copper Weight: 1.1 kg Dimension: W x H x D: 28 x 15 x 25.5 cm Grid Diameter : 23 cm Propeller [...]
Fans and Filters
Pressed Ventilation Reducer 100mm – 315mm Used to reduce from one standard ventilation size to another.
This product has multiple variants. The options may be chosen on the product page
Odour Control
ONA Air Filters allow for the complete and continuous air filtration of your indoor gardens air exhaust. Just attach to your ventilation system, insert the desired number of ONA blocks, and any unwanted odours will be removed from your ducting, quickly effectively and permanently. Freshness that Lasts! ONA air filters will provide continuous neutralisation of [...]
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
Variispeed Fan Speed Controller The Variispeed Fan Speed Controller adjusts and controls the speed of your fans. This then ensures a longer life of the fan motor. It has variable speed control along with full power and off and is suitable for up to 300w.
Extractor Fans
An optimised design for high pressure and quiet air movement.
Fans and Filters
RAM 150mm Clip On Fan (6″) – 15w Circulator Fan The RAM Clip On Fan has a quality high output with quiet motor and sturdy clips. This 150mm (6″) fan has 2 speed settings and an adjustable head. It is easy to assemble with a 1.4 metre power cord and multi-region plug.
Fans and Filters
Air movement is very important in your grow room as it strengthens up your plants and circulates the air around, creating more even temperatures throughout. Tip: Air circulators work in a different way to fans and are the best for moving air within a grow room. The correct way to use them to maximise their performance [...]
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
The RAM ALUDUCT Low Noise Ducting with a metal layer on the inside and a clear layer on the outside makes it flexible and adaptable to shape. The clear layer works effectively to minimise the noise of the foil.
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
RAM 180mm (7”) Oscillating Multi Fan – 20W A versatile fan with multiple applications. Includes multiple clip styles meaning this fan can stand on flat surfaces, hang from a suitable wall screw (not included), clip to a horizontal object, or hang from vertical poles (16-25 mm diameter). The RAM Oscillating Multi Fan has 2 speed [...]
Fans and Filters
Ducting Tee Connector 100mm – 315mm Wentylation Ideal for diverting airflow or air cooling.
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
Clamp 60mm – 160mm Ducting These quick release and easy-to-use clamps are used to attach fans and filters to ducting.
Fans and Filters
Ram Mixed-Flow Inline Extractor Fan 100mm – 200mm With 2 speed A switched two speed mixed-flow inline fan which is optimised for high pressure and quiet air movement. The RAM Mixed-Flow Inline fan has an integral mounting bracket and is fitted with an IEC socket. Featuring Fast Clean The RAM Mixed-Flow Inline fan features a [...]
This product has multiple variants. The options may be chosen on the product page
Fans and Filters
RAM 400mm (16″) Pedestal Fan Circulator Fan This oscillating RAM Pedestal Fan is reliable and quiet. The base of this fan provides a solid, sturdy support. It has an adjustable 400mm (16”) head with a finger safe mesh grill. It has three-speed settings and the height of the fan can easily be adjusted.
Fans and Filters
Gekko Acoustic Box 150mm – 315mm Extractor Fan Wentylation Gekko acoustic Box fans don’t just look the part, they’ve been designed and engineered to operate at extremely low noise levels while moving incredible amounts of air. They are premium quality products, assembled in the UK using precision engineered components. The highlights of the Gekko Fan [...]
This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.