LightHouse Max

LightHouse MAX is the premium tent, for the grower who wants no compromises. It offers a durable, heavy duty frame that incorporates metal corners, the thickest, strongest poles on the market and multiple choices of ducting and cable glands all with double seals.

The attention to detail in the design of the LightHouse range extends through both the premium LightHouse MAX and the budget LightHouse LITE.

Both benefit from a new reflective material called ULTRALUX, which offers up to 30% higher reflectivity over traditional products, while the Tivax zips fitted to all doors have proven ability to offer a quality seal when closed.

LightHouse MAX Core Specification:

• Heavy duty Tri-Layer 600 Denier material with the special LightHouse ULTRALUX reflective liner

• Quality Tivax double lined zips that are easy to use and offering good light-proofing with no snagging

• Frame – 22 mm or 25 mm diameter poles with welded metal corners – offering ultimate strength and longevity

• All outlets for air and cables are double-lined and light-tight with pull toggles on each lining

• All larger extraction socks benefit from outer attachable Velcro covers to stop light when not in use

• Roof support bars with rubber ends for strong grip

• Waterproof insert tray

• 4 x filter straps

• Velcro handy straps for securing cables and wires

• Door clips on all doors for fastening when open

• Supplied in a fabric carry bag

Products Specifications:

LightHouse MAX 0.5m

Pole diameter: 22 mm

Extraction is through the roof with a 200 mm (8”)ducting gland

2 x inline 200 mm (8”) socks for use with air-cooled lighting

2x 100 mm (4”) cable glands

3 x low level passive air vents with fine (anti-mite) mesh.

Also includes light proof covers for when not in use

4 x filter straps

Recommendations: For single lamp set up – either a 250 W HID or high wattage CFL Recommended minimum extraction fan size – 100 mm (4″)

Dimensions: 0.5m x 1m x 1.8m

LightHouse MAX 0.76m²

Pole diameter: 22 mm

Extraction is through the roof with a 200 mm (8”) ducting gland

2 x inline 200 mm (8”) socks for use with air-cooled lighting

2 x 100 mm (4”) cable glands 3 x low level passive air vents with fine (anti-mite) mesh.

Also includes light proof covers for when not in use

4 x filter straps

Recommendations: For single lamp set up – either a 250 W/315 W HID or high wattage CFL Recommended minimum extraction fan size – 100 mm (4″)

Dimensions: 0.76m x 0.76m x 1.8m

LightHouse MAX 1m²

Pole diameter: 22 mm

2 options on extraction, through the roof or side

1 x base side inlet with a 250 mm (10”) ducting gland

2 x inline 250 mm (10”) socks for use with air-cooled lighting

2 x 100 mm (4”) cable glands 3 x low level passive air vents with fine (anti-mite) mesh.

Also includes light proof covers for when not in use

2 x side doors for easy access to crop

4 x filter straps

Recommendations: Ideal as a drying/storage environment, when used with the LightHouse DryNet. For single lamp set up – 400 W HID. Recommended minimum extraction fan size – 100 mm (4″)

Dimensions:1m x 1m x 2m

LightHouse MAX 1.2m²

Pole diameter: 25 mm

2 options on extraction, through the roof or side

1 x base side inlet with a 300 mm (12”) ducting gland

2 x inline 300 mm (12”) socks for use with air-cooled lighting

2 x 100 mm (4”) cable glands

3 x low level passive air vents with fine (anti-mite) mesh Also includes light proof covers for when not in use

2 x side doors for easy access to crop

4 x filter straps

Recommendations: Fits most growing systems and is ideal for the PLANT!T aeros IV Master System For single lamp set up – 600 W HID Recommended minimum extraction fan size – 125 mm (5″)

NOTE: This tent will hold a fan inside the 300 mm socks

Dimensions:1.2m x 1.2m x 2m

LightHouse MAX 1.5m²

Pole diameter: 25 mm

2 options on extraction, through the roof or side

1 x base side inlet with a 300 mm (12”) ducting gland

2 x inline 300 mm (12”) socks for use with air-cooled lighting

2 x 100 mm (4”) cable glands

3 x low level passive air vents with fine (anti-mite) mesh.

Also includes light proof covers for when not in use

2 x side doors for easy access to crop

4 x filter straps

Recommendations: Fits most growing systems and is ideal for the PLANT!T aeros IV Master System For single lamp set up – up to 1000 W HID Recommended minimum extraction fan size – 125 mm (5″) NOTE: This tent will hold a fan inside the 300 mm socks.

Dimensions:1.5m x 1.5m x 2.0m

LightHouse MAX 2m²

Pole diameter: 25 mm

4 options on extraction, through the roof or side

2 x one piece waterproof insert tray

1 x base side inlet with a 300 mm (12”) ducting gland

4 x inline 300 mm (12”) socks for use with air-cooled lighting

4 x 100 mm (4”) cable glands

6 x low level passive air vents with fine (anti-mite) mesh.

Also includes light proof covers for when not in use

2 x side doors, plus large rear door for easy access to crop

8 x filter straps

Recommendations: For four lamp set up – 4 x 400 W HID. Recommended minimum extraction fan size – 150 mm (6″) NOTE: This tent will hold a fan inside the 300 mm socks.

On the LightHouse MAX 2m2, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off! For this model it should also be noted that the product is supplied in 2 boxes due to weight and manual handling restrictions.

Dimensions:2.0m x 2.0m x 2.0m

The LightHouse MAX 2.4

Has 25mm poles and has

2 options for extraction through the roof or the side.

Also there is a base side inlet with a 300mm (12″) ducting gland.

There are 2 x inline 300mm (12″) socks for use with air-cooled lighting and

2 x 100mm (4″) cable glands.

This tent has 4 x low level passive air vents with fine (anti-mite) mesh that includes light proof covers for when they are not in use and 4 filter straps.

Two side doors are included for easy access to the crop.

It is recommended for a two lamp set up (2 x 600w HID) and an extraction fan around 700m3.

Notes Please note: This tent will hold a fan inside the 300mm socks.

On the LightHouse MAX 2.4 access from the front can either be by using the two inner curved doors or if full access is required – just zip the entire front off!

Dimensions:1.2m x 2.4m x 2m

LightHouse MAX 2.4m²

Pole diameter: 25 mm

2 options on extraction, through the roof or side

1 x base side inlet with a 300 mm (12”) ducting gland

2 x inline 300 mm (12”) socks for use with air-cooled lighting

3 x 100 mm (4”) cable glands

4 x low level passive air vents with fine (anti-mite) mesh.

Also includes light proof covers for when not in use

2 x side doors, plus large rear door for easy access to crop

4 x filter straps

Recommendations: Two lamp set up – 2 x 600 W HID. Recommended minimum extraction fan size – 150 mm (6″)

Please note: This tent will hold a fan inside the 300mm socks.

On the LightHouse MAX 2.4m² access from the front can either be by using the two inner curved doors or if full access is required – just zip the entire front off!

Dimensions:2.4m x 2.4m x 2m