LUMATEK Pro 600W 400V DIGITAL BALLAST
The Lumatek Ultimate Pro 600 has been specifically designed to help the hobby grower access the benefits of using electronics to control and power both 240V MH/HPS and professional 400V HPS horticultural lamps.
The Lumatek Ultimate Pro automatically detects the lamp connected and then powers that light. A Lumatek 600W 400V HPS lamp is supplied with the ballast.
The 400V lamps are superior to the 240V lamps traditionally used in the hobby hydroponics and indoor garden markets due to their increased efficiency and greater PAR spectrum output.
Photosynthetic Active Radiation (PAR) refers to the part of the light spectrum that plants actually use to photosynthesize and make energy to grow.
Using microprocessor and software controlled electronics, the Lumatek Ultimate 600 is an ultra-high frequency ballast operating at 120KHz (120,000 cycles per second) for 400V and 90KHz for 240V lamps.
A conventional magnetic ballast operates at 50Hz, making much less light available to the plant.
You can see the difference in quality of light yourself using the video camera on your phone, try filming a light powered by a magnetic ballast (strobe flicker) and then the Lumatek (solid light).
This increased efficiency means less power is lost from the power supply to the lamp.
The high frequency output results in low power loss at the cathodes in addition to better overall power management and energy efficiency.
The Lumatek Ultimate 600 is a remote electronic ballast that will plug into standard 240V mains supply and power 600W 400V HPS and 400W/600W 240V MH/HPS grow lamps. This ballast has an IEC connector on the lamp cable and can connect to any regular reflector.
This intelligent digital ballast can easily integrate into your existing grow room; simply replace your ballast with the Lumatek Ultimate 600 and it will automatically detect which type of lamp you are using and provide precise voltage required for optimum PAR spectrum output.
If you are powering a 600W 400V grow lamp, you will instantly achieve more useable grow light!
More light = more yield!
LUMATEK Pro 1000W 400V DIGITAL BALLAST
The Lumatek Pro 1000W 400V Digital Ballast has been developed to drive 400 volts Double Ended horticulture EL lamps, and this by means of a standard 230 Volt power supply.
Lumatek introduces the next generation of 240V fully dimmable electronic ballasts that can control professional horticulture 400V lamps and at an affordable price.
Developed to meet the main requirements of the breeder:
Additional PAR Light Output – up to 10% more, More light = more revenue, Improved PAR Light Output maintenance, Highest System Efficiency, High reliability, low energy costs, Affordable price – only 20% more than standard 240V equipment, Connect to 240V AC and 400V starting EL Professional Double Ended horticultural grow lights.
400V assimilation lighting is now standard in professional horticulture because of the extra PAR (grow light) which produce this with greater efficiency and lower energy costs. Improved PAR Light ensures a constant and uniform plant growth.
Lumatek uses the latest electronic components to reduce the cost of high-end professional equipment for the end user.
Lumatek Pro 400V EVG developed specifically also the hobby – to set grower able to drive 400 volt eem professional horticultural lamp 240 volt outlet using a standard and at an affordable price. This are all the advantages of professional horticulture 400 volt lamps for everyone within range and at a price that a hobby – breeder can afford.
Lumatek Pro ballasts with all 400 volt lamps from leading manufacturers, including Philips tested. These tests have demonstrated PAR 8-10% more light output compared to standard horticultural lamps.
400V horticultural lighting even decrease after one year of use even better PAR light output with levels only by 5%.
The Lumatek Pro 1000W 400V Digital Ballast is designed to provide professional 1000W 400V DE (Double – Ended) to drive EL (electronic) lamps and can be connected to Lumatek Pro1000W THE reflectors.
Lumatek have a proven reputation for reliability and performance in Electronic Ballast. These new 400V series of professional Lumatek provides affordable professional lighting market.
LUMATEK LAMPS
OPTIMAL EFFICIENCY.
The Lumatek range of horticultural HID grow lamps are tuned to the ultra-high operating frequency of Lumatek e-ballasts.
The lamp’s components have been reinforced making them much more robust and therefore a long life grow-lighting solution delivering a high level of Photosynthetic Active Radiation (PAR/PPF) to promote healthy plant growth and high crop yield.
These lamps are produced using high-grade ceramic arc tube technology and specific horticultural gas blends that create optimal spectral output for plant growth.
Lumatek 400V Pro High Pressure Sodium Lamp
Perfect for Standard and Controllable ballasts
Lumatek HPS Lamp 600W 400V
This HPS Lamp 600W 400V, pulse-start lamp, has been engineered for use with Lumatek Ultimate Pro 600W 400V electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.
400V HPS lamps are more efficient than standard HPS lamps and this allows them to have a 10% increase in light intensity and PAR/PPF output.
The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency.
PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance.
Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.
Lumatek HPS Lamp 1000W DE 400V
This Double-Ended (DE) pulse-start lamp, has been engineered for use with
Lumatek 1000W Pro 400V electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.
Double-ended HPS lamps are more stable than traditional, single-ended HPS lamps and this allows them to have a 10% increase in light intensity and PAR/PPF output.
The increased light intensity also enables this lamp to be positioned further from plant canopy increasing light footprint & light uniformity if desired.
The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency.
PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance.
Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.